Advertisement
ADCP-93-080 Rev B April 2018
THREE-TIER CABLE CLAMP KIT
Content
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
2.2
2.3
3
CUSTOMER INFORMATION AND ASSISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
INTRODUCTION
These instructions provide procedures for installing cable clamps in a stacked
(Three Tier) arrangement. Up to three cable clamps can be assembled together for
securing up to three cables in a Fiber Entrance Cabinet (FEC).
Revision History
ISSUE
1
05/1997
1
05/1999
1
06/2008
Rev B
April 2018
Related Publications
Listed below are related manuals and their publication numbers. Publications can be
downloaded from the CommScope web site at
http://www.commscope.com/SupportCenter
Title/Description
Fiber Entrance Cabinet (FEC) User Manual
Trademark Information
CommScope (logo) and Commscope are trademarks.
1443888 Rev B
(OSP-CLPFEC-LG)
Two Cables Per Entry Port (Figure 2B). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Three Cables Per Entry Port (Figure 2C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
DATE
REASON FOR CHANGE
Original.
Updated to current format (1999).
Updated to current format (2007).
Updated to CommScope format and contact info updated.
Installation
Instructions
Page
ADCP Number
93-031
Page 1
© 2018, CommScope, Inc.
Advertisement
Table of Contents
Related Manuals for CommScope OSP-CLPFEC-LG
Summary of Contents for CommScope OSP-CLPFEC-LG
- Page 1 06/2008 Updated to current format (2007). Rev B April 2018 Updated to CommScope format and contact info updated. Related Publications Listed below are related manuals and their publication numbers. Publications can be downloaded from the CommScope web site at ...
- Page 2 ADCP-93-080 • Rev B • April 2018 1 GENERAL The Three Tier Clamp kit (OSP-CLPFEC-LG) is designed for use in the Fiber Entrance Cabinet (FEC). The FEC uses a water resistant grommet with three cutouts to accommodate multiple and various sized cables in each entry port. The OSP- CLPFEC-LG kit covers cable with outside diameters from 0.80 inch to 1.2 inches (20...
- Page 3 (NOT USED) CLAMPS POINTS B. TWO CABLES PER ENTRY PORT SPACER BRACKETS CABLE TERMINATING AND GROUNDING PLATE GROUND CABLE TERMINATION CLAMPS POINTS C. THREE CABLES PER ENTRY PORT 9665-A Figure 2. Three-Tier Clamp Configurations Page 3 © 2018, CommScope, Inc.
- Page 4 5. Connect the ground straps to the cable terminating and grounding plate as shown in Figure GROUNDING BLOCK SPLIT GROMMET CABLE GROUND CLAMP STRAP CABLE SUB- 9666-A UNITS CABLE TERMINATING AND GROUNDING PLATE Figure 3. Three-Tier Clamp Page 4 © 2018, CommScope, Inc.
- Page 5 Note: Do not remove the spacer bracket after the bolts are tightened. 4. Connect the ground straps to the cable terminating and grounding plate as shown in Figure Page 5 © 2018, CommScope, Inc.
- Page 6 ADCP-93-080 • Rev B • April 2018 3 CUSTOMER INFORMATION AND ASSISTANCE To find out more about CommScope® products, visit us on the web at www.commscope.com For technical assistance, customer service, or to report any missing/damaged parts, visit us at http://www.commscope.com/SupportCenter...
Need help?
Do you have a question about the OSP-CLPFEC-LG and is the answer not in the manual?
Questions and answers