Control And Cleaning Of The Platform - Epson Part Feeding 7.0 IF-80 Manual

5. Maintenance and Component Replacement

5.2.3 Control and Cleaning of the Platform

■ If the surface is damaged so as to obstruct vision or the behavior of parts, its
replacement must be preceded.
For more information about maintenance parts, please contact the supplier of
CAUTION
your region.
Material needed:
- Lint-free cloth
- Isopropanol alcohol
Step1
Control the surface state of the platform (A) and be particularly careful of the following
points:
Step2
Clean the surface of the platform.
42
- Dirt or spotted surface
- Oily or greasy surface
(A)
Figure 5-2: Platform
Part Feeding 7.0 IF-80 Rev.3