Table of Contents
Advertisement
Protouch2 CLI User Manual
8.1 USB Devices
If the internal HFC device is enabled by default, depending on the OS (Win 7 or 8.1)
and architecture (32 or 64 bit), it takes about 0.5 to 2 seconds for programming
configuration file and 4 to 8 seconds for programming firmware file.
If the internal HFC device is disabled by default, depending on the OS (Win 7 or 8.1)
and architecture (32 or 64 bit), it takes about 5 to 15 seconds for programming
configuration file and 8 to 18 seconds for programming firmware file.
8.2 LAN78xx Devices
To program 256 bytes in LAN78xx devices EEPROM, it takes about to 2 to 3
seconds with EHCI controller and takes about 7 to 8 seconds with xHCI controller.
To program 256 bytes in LAN78xx devices OTP, it takes about to 2 to 3 seconds with
EHCI controller and takes about 7 to 8 seconds with xHCI controller.
2016 Microchip Technology Inc
Page 10
Advertisement
Table of Contents
Need help?
Do you have a question about the Protouch2 and is the answer not in the manual?
Questions and answers