Protouch2 CLI User Manual
9.6.7 manufacturer
Manufacturer String of the USB2 HUB.
9.6.8 product
Product String of the USB2 HUB.
9.6.9 serial
Serial String of the USB2 HUB.
9.6.10
usb3vid
This is a 16-bit value that uniquely identifies the Vendor of the USB3 user device
(idVendor: assigned by USB-Interface
9.6.11
usb3pid
This is a 16-bit value that the Vendor can assign that uniquely identifies this
particular product for USB3 user device (idProduct)
9.6.12
usb3did
This is a 16-bit device release number for USB3 user device in BCD format
(bcdDevice)
9.6.13
usb3vcd
USB3 Specification Release Number in BCD format (bcdUSB)
9.6.14
usb3languageid
Language ID of the USB3 HUB.
9.6.15
usb3manufacturer
Manufacturer String of the USB3 HUB.
9.6.16
usb3product
Product string of the USB3 HUB.
9.6.17
usb3serial
Serial string of the USB3 HUB.
Only the above configuration items are supported when using /cv command.
9.6.18
Get value of parameter before and after programming
To display the configuration items before and after programming.
>pt2main.exe /p < config_filename.cfg> /cv "vid,pid" /id <index>
>pt2main.exe /bp < config_filename.cfg> /cv "vid,pid" /id <index>
2016 Microchip Technology Inc
Page 25
Need help?
Do you have a question about the Protouch2 and is the answer not in the manual?