GDC SX-3000 User Manual page 80

3. CONTROL PANEL
A new window opens as seen in Figure 50. Select an automation label to view the actions
2
associated with the label. Press
3 When a projector is configured for automation, projector primitives and macros can be triggered
from this interface as well. Select the projector primitive or macro to be executed, and click the
Send Projector Primitive
Please refer to Section 2.3.6. Automation for instructions on how to configure automation
labels, actions and devices.
SX-3000 Standalone Integrated Media Block™ User Manual
Figure 50 Executing Automation.
Execute to execute the automation label.
or Send Projector Macro to send the command to the projector.
- 80 -
2
3
February 14, 2013