GDC SX-3000 User Manual page 22

2. SMS
13
[Change Technician Password]
14
[Change Maintenance Password]
15
16
17
SX-3000 Standalone Integrated Media Block™ User Manual
[SNMP Setup]
[Automation]
[IMB]
[Change Technician Password]
Password. When [Change Technician Password]
will appear. The first prompt is for the user to enter the old password, the
second prompt is for the user to enter the new password and the third
prompt is for the system to verify the new password.
[Change Maintenance Password]
Password. When [Change Maintenance Password]
will appear. The first prompt is for the user to enter the old password, the
second prompt is for the user to enter the new password and the third
prompt is for the system to verify the new password.
[SNMP Setup] button. For accessing the SNMP Configuration
Interface (see Section 2.3.5).
[Automation] button. This will bring up the automation configuration user
interface used to integrate the IMB with external devices such as projectors
and automation controllers (see Section 2.3.6).
[IMB] button. After connecting to the IMB the window will display the IMB
version information as well as check the Marriage and Service Door status
on the projector. For IMB marriage please reference the SX-3000
Installation manual as process will depend on projector manufacturer and
software version.
- 22 -
button. For changing the Technician
is pressed, 3 prompts
button. For changing the Maintenance
is pressed, 3 prompts
February 14, 2013