1
2
3
1
Specify a Network-Attached Storage System (NAS) which has an NFS share available to this SX-
3000 system for the use as data storage.
2
Configure the SX-3000 to use an attached eSATA RAID as data storage. This is to be used with
PSD-3000.
3
Configure the SX-3000 to use a single externally attached eSATA hard disk as data storage. The
external eSATA hard disk must be attached to eSATA Port 1 on the SX-3000.
February 14, 2013
2.3.4.7 IMB Storage Tab
Figure 12
IMB StorageTab.
SX-3000 Standalone Integrated Media Block™ User Manual
- 29 -
2. SMS