GDC SX-3000 User Manual page 70

2. SMS
2
To setup a Barco Series 2 Projector go to SMS-> Configuration -> General- Automation ->
Devices ->Add-> Device Type-> Projector-> Model-> BARCO. The
as PROJECTOR
3 To set up the Christie Series 2 projector the
Model
4
To setup an NEC Series 2 projector the
Model
5 The
projectors.
SX-3000 Standalone Integrated Media Block™ User Manual
and Model set to BARCO.
set to CHRISTIE.
set to NEC.
Series 2 checkbox must be checked to ensure proper port number setting for Series 2
Device Type should be setup as
Device Type should be setup as
- 70 -
Device Type should be setup
PROJECTOR and
PROJECTOR and
February 14, 2013