2
3
[Use RPL for SMPTE Subtitle]
1
[Network Timeout]
[Projector blank time]
2
[Enable Network Time Code
[Transmission Interval]
3
February 14, 2013
2.3.4.2.
CineCanvas
Figure 7
Send a SMPTE-compatible Resource Presentation List (RPL) instead
of an Interop-compatible Subtitle Presentation List to the projector for
Cinecanvas subtitles. This is only enabled when SMPTE subtitles are
available for the CPL.
Timeout in seconds for communication with the projector.
Select the blank time of the projector during change of PCF or format.
This is to prevent noise when the PCF or format is changed.
Check this to activate transmission of playback time-code over UDP.
Transmission]
Enter the IP of the receiver of time-code transmission of UDP.
[Receiver IP]
Indicates the time interval between transmissions.
Allows playback of mixed 2K and 4K content at a constant resolution.
[Resolution]
Note: This feature will only affects video, and will not automatically
scale PNG subtitles to the target resolution.
Configuration [CineCanvas].
- 23 -
SX-3000 Standalone Integrated Media Block™ User Manual
2. SMS
1