Sensors - GDC SX-3000 User Manual

2. SMS
2
3
1 On the
above.
2 Set the threshold temperature required for the system sensors by typing in the field or using
an on-screen keyboard
Temperature
NOTE: When the Trap is On, a trap is sent if the system temperature exceeds the
maximum threshold temperature.
Set the threshold CPU fan speed (rpm – revolutions per minute) by typing on the field or using
3
an on-screen keyboard
Speed
NOTE: When the Trap is On, a trap is sent if the CPU fan speed exceeds the threshold value.
SX-3000 Standalone Integrated Media Block™ User Manual

2.3.5.3.5. Sensors

Figure 19 SNMP Configuration [Motherboard].
SNMP Configuration menu, select Sensors. A new window opens as seen in Figure 19
. Activate the Trap by checking the small box opposite
Threshold.
. Activate the Trap by checking the small box opposite
Threshold.
- 36 -
1
System
CPU Fan
February 14, 2013