GDC SX-3000 User Manual page 66

2. SMS
2
A new window for the
open the
3 Use the
(a) At Network Timeout, indicate how long the IMB will wait for the projector to respond to
(b) At
Tick the
4
Receiver
At
Once set, press
5
SX-3000 Standalone Integrated Media Block™ User Manual
Configuration
CineCanvas menu.
[▲] [▼]
buttons to adjust the
accept the subtitles before popping up an error message. Error can occur due to:
• Incorrect configurations on the IMB and projector. Make sure the IMB and projector are
set on the same LAN network.
• Loose network cable connection between the IMB and projector.
Projector blank time, indicate how long the projector should be blanked during change
of PCF or format before playback should commence. This is needed because the projector
shows some noise when the PCF or format is changed.
Enable Network Time Code Transmission
IP, use the on-screen keyboard to type in the Network IP address.
Transmission Interval, use the
[OK] to apply settings and return to
menu opens as seen in Figure 36. Press
Network Time out and
option to enable network transmission. At
[▲] [▼]
buttons to adjust the time of transmission interval.
Main menu.
- 66 -
CineCanvas
Projector blank time.
(a)
(b)
to
February 14, 2013