Storage - GDC SX-3000 User Manual

2
4
5
6
1
1 On the
2 Activate the Trap by checking the small box opposite the corresponding storage device.
NOTE: When the Trap is On, a trap will be sent to the SNMP Manager if the system cannot
detect the specified device.
3 Set the desired threshold temperature for respective storage device by using the
Activate the Trap by checking the small box opposite the corresponding storage device.
NOTE: When the Trap is On, a trap will be sent to the SNMP Manager when the
threshold temperature is reached.
4 Activate the Trap by checking the small box opposite
NOTE: When the Trap is On, a trap will be sent if the RAID Device is missing or degraded.
5 Activate the Trap by checking the small box opposite
NOTE: When the Trap is On, a trap will be sent if the data storage is not mounted on the
system.
6 Set the threshold mount capacity of the mount data storage by typing in the field or using the
on-screen keyboard
NOTE: When the Trap is On, a trap will be sent to the SNMP Manager if the mount
capacity exceeds the threshold value.
February 14, 2013

2.3.5.3.2. Storage

Figure 16 SNMP Configuration [Storage Settings].
SNMP Configuration menu, select Storage. A new window opens as seen in Figure 16 above.
. Activate the Trap by checking the small box.
RAID Device.
Mount Data Storage.
SX-3000 Standalone Integrated Media Block™ User Manual
- 33 -
3
[▲] [▼]
and buttons.
2. SMS