Calibrate Touchscreen - GDC SX-3000 User Manual

5. ADMIN PANEL
1 Select
2 If

Calibrate Touchscreen

seen in Figure 119.
3 Touch the blinking symbol until it stops. Continue touching the blinking symbols on each of the
four (4) corners of the screen to complete the calibration of the touchscreen.
SX-3000 Standalone Integrated Media Block™ User Manual
5.3.4.3. Calibrate Touchscreen
Figure 118 Touchscreen [Calibrate Touchscreen].
Calibrate Touchscreen.
is selected when in
Figure 119 Calibrating the touchscreen by 4-pt calibration method.
- 138 -
TK USB screen, the screen will appear as
3
2
1
2
2
2
February 14, 2013