GDC SX-3000 User Manual page 42

2. SMS
5 Under
6 To search click the
devices. Once discovered, to select the device and press Add.
SX-3000 Standalone Integrated Media Block™ User Manual
Projector Settings,
(a) When the selected device type is PROJECTOR, select the model of the projector
you want to use from a dropdown list.
When the selected device type is JNIOR_IO, only one model of the Ethernet I/O
controller is available from the dropdown list.
(b) Set the parameters such as
Login name and Password. Use the on-screen keyboard
address, Port, Login name and Password.
(c) The status of the device can be
list as seen below.
NOTE: This is the only option available for
GPIO is selected.
Search Devices on Network
- 42 -
IP address, Port and Status
Enabled or Disabled. Select from the dropdown
Projector Settings
button. This will scan the network for available
of the selected device,
to type in the IP
when System or
February 14, 2013