GDC SX-3000 User Manual page 21

1
[Use startup / shutdown
[Playlist menu password
2
3
[Skip non-playable
[Reset TimeCode at end of clip]
4
[Skip checking assets
5
6
7
8
9
10
11
12 [Change User Password]
February 14, 2013
password]
protected]
composition playlist]
during ingest]
[Subtitle Overlay]
[Subtitle Delay]
[Font Size]
[ASI Packet]
[Date Format]
[Language]
There are 3 levels of users on the system
Maintenance. If this option is checked, the system will start up with a
password dialog and the user will have to authenticate themselves as
one of the above 3 users to start using or shut down the system.
If this option is checked, the User level will be denied the ability to edit
or create any playlists. Only Maintenance and Technician level users
will be able to create and edit playlists.
With this option checked any non-playable CPL within a Show playlist
will simply be skipped, a message will appear on the SMS screen
indicating that a CPL has been missed, however playback will continue.
'Reset TimeCode at end of
If the
will reset to zero [0:0:0:0] whenever a playback ends or stops. The
Timecode Display will reset to zero [0:0:0:0] while the
Remaining time will reset to 00 hr 00 min 00 sec. The Slider Bar will
return to its starting point at the extreme left.
'Reset TimeCode at end of
If the
system will retain the timecode at the point in which playback ends
or stops. The Slider Bar will remain at where the playback ends or
stops.
With this option checked the Digital Cinema Package assets will not be
checked for their integrity, this option will reduce ingestion time but
decrease the reliability of the ingestion.
[Subtitle Overlay] option. [Subtitle Overlay]
for Series 2 projectors for 2D JPEG2000 content. For more
information, please refer to Section 2.8.2. Subtitle
This option provides the ability to delay the on screen subtitles, the delay
is set in number of frames.
'Font
Size' option. For changing the size of the font on the screen.
This option is provided to select the size of the packets (204 or 188
bytes) on the incoming ASI signal.
'Date
Format' option. For changing the displayed format of the
date.
'Language' option. For changing the user interface language.
[Change User Password] button. For changing t h e User Password.
When [Change User Password]
first prompt is for the user to enter the old password, the second
prompt is for the user to enter the new password, and the third prompt
is for the system to verify the new password.
- 21 -
- User, Technician,
clip' option is selected, the timecode
Duration
clip' option is not selected, the
is supported
Overlay.
is pressed, 3 prompts will appear. The
SX-3000 Standalone Integrated Media Block™ User Manual
2. SMS
and
and