Table of Contents
Advertisement
DMX Address - DMX Address Setting.
1. Press either the MENU, UP, or DOWN buttons until "DMX Address" is displayed, then press
ENTER.
2. The current DMX address will be displayed. Press the UP or DOWN buttons to find your desired
DMX address and press ENTER to confirm your setting. Press the MENU button to exit without
any changes.
DMX CH Mode - This will let you select your desired DMX channel mode.
1. Press either the MENU, UP, or DOWN buttons until "DMX CH Mode" is displayed, then press
ENTER.
2. The current DMX channel mode will now be displayed. Press the UP or DOWN buttons to find
your desired DMX channel mode and press ENTER to confirm your setting. Press the MENU but-
ton to exit without any changes.
No DMX State - Select the operating mode that the fixture will revert to in the event that the DMX sig-
nal is lost or interrupted.
1. Press either the MENU, UP, or DOWN buttons until "No DMX State" is displayed, then press
ENTER.
2. Press the UP or DOWN buttons to find the operating mode you would like the unit to automatically
revert to if the DMX signal is lost or interrupted.
• Hold Last - The unit will holds the last received DMX settings.
• Blackout - The unit will automatically go into standby mode.
• Manual - The unit will default to the settings selected under the "Manual Control" function.
3. Press ENTER to confirm.
Dim Modes - This will let select your desired dimmer mode and adjust the dimmer speed. The dim-
mer speed adjustment will affect all dimmer modes.
1. Press either the MENU, UP, or DOWN buttons until "Dim Modes" is displayed, then press ENTER.
2. 1 of 6 dimmer curves or dim speed will be displayed: "Standard", "Stage", "TV", "Architectural",
"Theatre", or "Stage 2". See the Dimmer Mode Chart section of this manual for more info.
3. Press the UP or DOWN buttons to find your desired dimmer curve, then press ENTER to confirm.
LED Refresh Rate - Adjust the dimming frequency.
1. Press either the MENU, UP, or DOWN buttons until "LED Refresh Rate" is displayed, then press
ENTER.
2. Use the UP or DOWN buttons to adjust the dimming frequency. Selectable options include: 900hz,
1000hz, 1100hz, 1200hz, 1300hz, 1400hz, 1500hz, 6000hz, and 25000hz.
3. Press ENTER to confirm.
Dim Curve - Select the dim curve.
1. Press either the MENU, UP, or DOWN buttons until "Dim Curve" is displayed, then press ENTER.
2. Use the UP or DOWN buttons to scroll through the 4 selectable options: Square, Linear, Inverse
Square, and S-Curve.
3. Press ENTER to confirm.
OPERATING INSTRUCTIONS
17
Advertisement
Table of Contents
