Operating Instructions - ADJ ULTRA HEX BAR 12 User Manual

O P E R A T I N G I N S T R U C T I O N S
Menu Lock:
You can set the menu to lock after 30 seconds. To unlock, press and hold the MODE button for at
least 5 seconds. To set the menu to lock after 30 seconds, press the MODE button until "OTHER" is
displayed. Press the SETUP button so that "LOCK:XXX" is displayed. "XXX" represents either ON or
OFF. Press the UP or DOWN buttons so that ON is displayed. Now the menu will lock after 30s.
LED Display On/Off:
To set the LED display light to turn off after 30 seconds, press the MODE button until "OTHER" is
displayed. Press the SET UP button so that "BLGT:XXX" is displayed. "XXX" represents either ON or
OFF. Press the UP or DOWN buttons so that OFF is displayed. Now the display light will turn off after
30s. Press any button to turn the display on again.
Operating Modes:
The Ultra Hex Bar 12 has six operating modes:
• DMX control mode - This function will allow you to control each individual trait with a standard
DMX 512 controller.
• RGBWA + UV Mode - Choose one of the six colors to remain static, or adjust the intensity of each
color to create a custom color.
• Sound Active mode - The unit will react to sound, chasing through the built in programs.
• Program Mode - The unit will run 1 of 20 built-in programs.
• Auto Mode - The unit will run an auto program.
• Static Color Mode - There are 63 colors to choose from.
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tai-
lored to their own individual needs. This function also allows you to use your fixtures as spot lights.
The Ultra Hex Bar 12 has 5 DMX modes: 6 Channel mode, 7 Channel mode, 8 Channel mode, 12
Channel mode, and 36 Channel mode. Refer to the DMX Traits section of this manual for detailed
information. This function will allow you to control each individual fixture's traits with a standard DMX
512 controller.
1. To run your fixture in DMX mode press the MODE button until "DMX MODE: is displayed. Press
the SET UP button so that ADDR:XXX" is displayed. "XXX" represents the current displayed
address.
2. Use the UP or DOWN buttons to select your desired DMX address, then press the SETUP button
to select your DMX Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes until the desired mode
is displayed. The available channel modes are 6-channel, 7-channel, 8-channel, 12-channel, and
36-channel. After you have chosen your desired DMX Channel mode plug in the fixture via the
XLR connections to any standard DMX controller.
12