Thermo Scientific 2870 Operating And Maintenance Manual page 23

Section 7 Explanation of Controls
7-2 Reciprocal Shaking Water Baths
Display
Heater ON Lamp
Enter Key
Indicator Lamps
Offset Key
Figure 7-1. Controls
Heater On
SELECT/ENTER
Temp.
Offset
To adjust temperature or shaking speed :
Press SELECT/ENTER button to set point.
p q
Press or until value is displayed.
Press SELECT/ENTER again to set the new value.
Press START/STOP to begin or end shaking.
Indicator Lamps
Actual
Bath Temp., °C
Speed, RPM
Set Point
Bath Temp., °C
Speed, RPM
Shaker
START/STOP
Thermo Scientific
Shaker Start
& Stop Key