Table of Contents
Advertisement
⚫ It is normal for air outlet to feel warm to touch after continuous operation on hot days.
⚫ Empty the water tank before moving the device.
⚫ Make sure the Water tank is correctly fitted otherwise the unit will not operate properly.
⚫ The dehumidifier starts up in the mode selected when the unit was last used.
⚫ The dehumidifier starts dehumidifying if the room humidity is 3% higher than the selected
humidity.
⚫
There is a protective 3-minutes time delay of the compressor. Wait 3 minutes for the
dehumidifier to resume dehumidification.
5. OPERATION
5.1
DIGITAL DISPLAY
Ambient humidity < 40%, it shows blue
40% ≥ ambient humidity ≤ 60%, it turns green
ambient humidity ＞ 60%, it displays red
5.2
CONTROL PANEL
5.3 SETTINGS
Power
In the standby state, press the power button to turn on, the operation indicator lights up and the
default fan speed is high, the LED shows ambient humidity. In the power-on state, press the
power button to turn off, the running indicator light goes off and the compressor stops
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 821-020V80 and is the answer not in the manual?
Questions and answers