Table of Contents
Advertisement
12. wAppLoxx Pro Plus App
To control the wAppLoxx Pro Plus system, a mobile app can be used that can be downloaded
from the App Store (iOS) or the Play Store (Android). To set up the wAppLoxx Pro Plus App,
the user must first have web access, created by the administrator (see chapter 8.2).
12.1.
Configuration of the wAppLoxx Pro Plus App
During initial start-up, the wAppLoxx Pro Control Plus is automatically configured to encrypt
the connection from all mobile devices that are added later. Proceed as follows:
1. Installing the wAppLoxx Pro Plus App
Scan the QR code with your smartphone and open the link displayed. Alternatively, you can
also find the ABUS wAppLoxx Pro Plus app in your App Store (iOS) or Play Store (Android).
Install the app on your smartphone.
2. Adding the wAppLoxx Pro Control Plus
After installing the wAppLoxx Pro Plus app, the control must be added in the app once. Click
the button "Add wAppLoxx Pro Plus". There are then three ways to add the control in the
app.
2a. Add with the QR code
For security reasons, the QR codes are only valid for one week and each QR code
can only be used once.
[81] wAppLoxx Pro Control Plus Complete
Instructions
V5
Advertisement
Table of Contents
