Table of Contents
Advertisement
11.1.
Remote functions
Click this button to arm or disarm a connected alarm system. You can configure two alarm
systems. This takes all settings from Chapter 10.1 into consideration.
This button activates the remote control function of the wAppLoxx Pro Cylinder for 30
seconds. Pressing it again stops the function immediately. After activating the remote
opening function, the outer knob on the wAppLoxx Pro Cylinder must be turned to carry out
an opening. Only doors for which the user has access permission are shown. Intrusion
cylinders are greyed out when alarm system is armed and the remote control function can
only be used after the alarm system is deactivated.
For Access cylinders, the remote control function can also be used when the alarm
system is armed.
[78] wAppLoxx Pro Control Plus Complete
Instructions
V5
Advertisement
Table of Contents
