3. wAppLoxx Pro Control Plus connections
The function of the inputs and outputs is dependent on the configuration settings
of the wAppLoxx Pro Control Plus.
Power supply:
Power consumption:
Attention: To ensure operation within the framework of CE approval, we recommend
only using the original ABUS power supply unit. (Item no.: 505366).
We recommend switching to a new original ABUS power supply unit particularly in the
event of problems with the power supply or if the existing power supply unit is defective.
Relay connector 1-4:
Input 1-6:
[14] wAppLoxx Pro Control Plus Complete
Instructions
12 V DC / 1.5A
max. 500 mA at 12 V DC
(when using the recommended power supply unit)
Switching power of the changeover relay: max. 30 V DC, 2 A
The relay contact is controlled via software (whether open
or closed).
12 V DC, max. 0.1 A
1. In 1-6 (+)
2. GND (-)
(input active at 12 V DC)
V5