1.2. wAppLoxx Pro Control Plus technical data
Scope of delivery:
Voltage
supply:
Power consumption: max. 500 mA at 12 V DC
Conditions of use:
Radio frequency:
Wireless range:
Encryption:
Exterior dimensions: 248 × 277 × 53 mm (H × W × D)
Material:
Tags:
Door components:
User groups:
Configuration:
Functions:
The wAppLoxx Pro Control Plus has been optimised for use in conjunction with
alarm systems. Some functions are therefore only available if an interface to an
alarm system has been set up for the wAppLoxx Pro Control Plus (Chapter 10.1).
[7] wAppLoxx Pro Control Plus Complete
Instructions
wAppLoxx Pro Control Plus, Quick Guide, System Card, Reset Card, 2
antennas, Duracell button battery, one terminal block
12 V DC, 1.5 A, via external power source
(not included)
(when using the power supply unit listed above)
Max. 80% relative humidity, non-condensing
868.3 MHz
Approx. 30 m indoors (100 m free field nominal)
With repeater/slave control approx. 60 m (max. 6 repeaters per
control and max. 5 controls per system)
AES 128-Bit
White plastic housing
Max. 1000
32 door components with one wAppLoxx Pro Control Plus
32 additional door components possible per slave control (max. 4 slave
controls)
→ Max. 160 door components possible with 5 controls
Max. 160 door groups
Max. 100
Web interface (web browser, platform-independent)
Optional permissions for access and/or "arming"/"disarming" of up to
2 alarm systems
Special key for a guard user
Fallback tag Remote access authorisation
Remote "arming"/"disarming"
Event management and email notification
Logging and time function
wAppLoxx compatible (only applies to item no. ACCO16500)
V5