Table of Contents
Advertisement
5. Starting up the wAppLoxx Pro Control Plus using the
Manager
Before you begin start-up, please insert the supplied Duracell battery CR 1220 into the
battery holder on the PCB of the WLX Pro Control Plus.
Connecting the wAppLoxx Pro Control Plus to a PC/laptop via a router/switch
1. Connect the wAppLoxx Pro Control Plus to the router/switch.
2. Connect the wAppLoxx Pro Control Plus to the power supply. If your router is set
to DHCP mode, it now assigns a new IP address to the wAppLoxx Pro Control Plus
automatically.
3. Changes to the router/switch can interfere with the network functionality. Please
also refer to the information in the manual supplied by the router/switch
manufacturer or contact your network administrator.
Now open the wAppLoxx Pro Plus Manager software. The current software version is
available for download at https://mobil.abus.com/product/ACCO16000. Once your
wAppLoxx Pro Control Plus has been found, you can select it.
[16] wAppLoxx Pro Control Plus Complete
Instructions
V5
Advertisement
Table of Contents
