Table of Contents
Advertisement
7. Configuration of the components
On the overview page of the main menu, you can find an overview of all the important
information about your wAppLoxx Pro Control Plus.
item "critical device status" (e.g. battery warnings or a loss of connection).
Make sure you have the latest firmware on your wAppLoxx Control Pro. If cloud access has
been allowed, you will receive a message if a new firmware version is available. You can find
more information about the firmware update under Section 6.6 "Upgrade and restore".
7.1. wAppLoxx Pro Plus Slave Control
wAppLoxx Pro Control Plus cascading
The cascading function allows you to connect up to five wAppLoxx Pro Control Plus in
master-slave mode in a local network. The master-slave function is used to increase the
range of wireless coverage.
wAppLoxx cylinders are thereby directly programmed at the master control into the master
or slave control or into an associated repeater. Account management is only carried out at
the system master control. All data such as user, locking plan, etc. are transferred from the
master control to the slave control.
Setting up a master/slave system
The master and slave controls must use the same firmware version and good
network communication between the master and slave controls is required for
smooth installation.
[31] wAppLoxx Pro Control Plus Complete
Instructions
Current messages are displayed
under the
V5
Advertisement
Table of Contents
