Table of Contents
Advertisement
10.2.
Example – Secvest
The following chapter describes the connection and configuration of the Secvest with the
wAppLoxx Pro Control Plus. With an alarm area, the wAppLoxx Pro Control Plus can be
connected directly to the Secvest. If two alarm areas are required, the Secvest Hybrid
Module is connected.
10.2.1. One alarm area
On the wAppLoxx Pro Control Plus, Input 1 is used for arming preparation and Input 2 for
arming acknowledgement. Thus, output 1 of the wAppLoxx Pro Control Plus controls the
zone input 1 on the Secvest for arming.
[64] wAppLoxx Pro Control Plus Complete
Instructions
V5
Advertisement
Table of Contents
