5.1 Setting the date and time
The date and time must always be correct to ensure smooth operation.
Once you have set the correct time, click on "Save".
A detailed description of all setting options can be found under Section 6.1
5.2 Programming a wAppLoxx Pro Cylinder in the wAppLoxx Pro Control
Your wAppLoxx Pro Control includes a system card and a reset card on delivery. These cards
have the following functions:
System card:
Since the wAppLoxx Pro Cylinder does not have a mechanical reset button, the cylinder is set
to programming or unpairing mode by presenting the system card. The system card can be
used for any wAppLoxx Pro Cylinder.
Reset card:
In order to prevent unauthorised unpairing of the cylinder by third parties, a reset card must be
programmed. The ID of this reset card is subsequently written on each cylinder used in the
system (analogous to a fallback user) and is thus a unique identification medium. This ensures
that a cylinder can only be reset using the unique reset card programmed by you.
Please keep the reset card in a safe place. Should you lose the reset card, the administrator
can create a new one.
wAppLoxx Pro Control Complete Instructions
[18]