Table of Contents
Advertisement
7.4. wAppLoxx Pro Wall Reader or Bridge Box
The following chapter describes how to pair and unpair the Bridge Box with the wAppLoxx
Pro Control Plus.
For more detailed information on connecting and starting up your wall reader, please refer
to the separate operating instructions. You can access them under the following link:
https://mobil.abus.com/Gewerbe/Zutrittskontrolle/wAppLoxx-System/Zentrale-Sets/WLX-
Pro-Wall-Reader-Set-IP67-Intrusion-weiss
Pairing the Bridge Box with the wAppLoxx Pro Control Plus
1. Click on wAppLoxx under Devices.
2. Click the green plus sign to add a Bridge Box.
3. Enter the name of the Wall Reader/door.
4. Select the control or repeater with which the Bridge Box is to be paired.
5. Click on "Register device", a pop-up will appear and the wAppLoxx Pro Control Plus is
in pairing mode.
6. Press the green pairing button on the wAppLoxx Pro Bridge Box for at least three
seconds. Once the pairing LEDs start to flash blue, release the pairing button.
7. If the pairing process is successful, the ID of the Wall Reader is displayed and the
pairing LEDs light up permanently blue.
8. Finally, click on Save.
[44] wAppLoxx Pro Control Plus Complete
Instructions
V5
Advertisement
Table of Contents
