7.3. wAppLoxx Pro Cylinder
If a wAppLoxx Pro Plus Slave Control or a wAppLoxx Pro Repeater should be
integrated into the master key system, it must be programmed first, as associated
wAppLoxx Pro components must be assigned to a slave control or a repeater during
programming.
A subsequent change in the assignment of a cylinder to its repeater or its control
can only be reset after unpairing.
All wAppLoxx Pro door components that have been created are displayed under the menu
item wAppLoxx with their signal strength and battery status. This also includes Edit, Lock and
Delete symbols.
Battery status
[38] wAppLoxx Pro Control Plus Complete
Instructions
Battery change
Lock+
Delete
Unlock
Edit
V5