Table of Contents
Advertisement
11.1 Remote functions
Click this button to arm or disarm a connected alarm system. This takes all settings from
Chapter 9.1 into consideration.
This button activates the remote control function of the wAppLoxx Pro Cylinder for 30 seconds.
Pressing it again stops the function immediately. After activating the remote opening function,
the outer knob on the wAppLoxx Cylinder must be turned to carry out an opening. Only doors
for which the user has access permission are shown. Intrusion cylinders are greyed out when
alarm system is armed and the remote control function can only be used after the alarm
system is deactivated. For Access cylinders, the remote control function can also be used
when the alarm system is armed.
wAppLoxx Pro Control Complete Instructions
[73]
Status of the secure web connection
Show the QR code to connect to the wAppLoxx Pro app
Change the user password
Unpair or delete the tag
Advertisement
Table of Contents
