Configuring The E-Mail Smtp Settings - Lexmark CX730 User Manual

Set up, install, and configure
Configuring the e‑mail SMTP settings
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The
settings vary with each e‑mail service provider.
Before you begin, make sure that the printer is connected to a network and that the network is connected to
the Internet.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > E‑mail.
3
From the E‑mail Setup section, configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
4
Click Save.
Using the Settings menu in the printer
1
From the home screen, touch Settings > E‑mail > E‑mail Setup.
2
Configure the settings.
Notes:
•
For more information on the password, see the list of
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
E‑mail service providers
•
AOL Mail
•
Comcast Mail
•
Gmail
•
iCloud Mail
•
Mail.com
•
NetEase Mail (mail.126.com)
•
NetEase Mail (mail.163.com)
•
NetEase Mail (mail.yeah.net)
•
Outlook Live or Microsoft 365
•
QQ Mail
•
Sina Mail
e‑mail service providers.
e‑mail service providers.
38