Lexmark CX730 User Manual page 306

Troubleshoot a problem
Action
Step 3
Check the cable and the ISP connection.
a
Use the correct cable, and then make sure that it is securely
connected to the ISP.
b
Check if the ISP solution interface cable is securely connected
into the receptacle of the controller board.
Does the ISP operate correctly?
Parallel or serial interface card does not operate correctly
Action
Step 1
Print a menu settings page, and then check if the parallel or serial
interface card appears in the Installed Features list.
Is the parallel or serial interface card listed in the Installed Features
list?
Step 2
Remove, and then install the parallel or serial interface card.
For more information, see
page 68.
Does the parallel or serial interface card operate correctly?
Step 3
Check the connection between the cable and the parallel or serial
interface card.
Does the parallel or serial interface card operate correctly?
Defective flash detected
Try one or more of the following:
•
Replace the defective intelligent storage drive.
•
From the home screen, touch Continue to ignore the message and continue printing.
•
Cancel the current print job.
Not enough free space in flash memory for resources
Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Delete fonts, macros, and other data stored in the flash memory.
•
Install a hard disk.
"Installing an internal solutions port" on
Yes No
The problem is Contact
solved. support.
Yes No
Go to step 3. Go to step 2.
The problem is Go to step 3.
solved.
The problem is Contact
solved. support.
306
customer
customer