Lexmark CX730 User Manual page 189

Use printer menus
USB
Menu item Description
PCL SmartSwitch Set the printer to switch to PCL emulation when a print job received through a USB port requires
it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
PS SmartSwitch Set the printer to switch to PostScript emulation when a print job received through a USB port
requires it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
Job Buffering Temporarily store print jobs in the hard disk or intelligent storage drive (ISD) before printing.
Off*
Note: This menu item appears only when a hard disk or an ISD is installed.
On
Mac Binary PS Set the printer to process Macintosh binary PostScript print jobs.
Auto*
Notes:
On
•
Off
•
Enable USB Port Enable the front USB drive port.
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Restrict external network access
Menu item
Restrict external network
access
Off*
On
External network address
E‑mail address for notification
Ping frequency
1–300 (10*)
Subject
Message
Note: An asterisk (*) next to a value indicates the factory default setting.
Auto processes print jobs from computers using either Windows or Macintosh operating
systems.
Off filters PostScript print jobs using the standard protocol.
Description
Restrict access to network sites.
Specify the network addresses with restricted access.
Specify an e‑mail address to send a notification of logged events.
Specify the network query interval in seconds.
Specify the subject and message of the notification e‑mail.
189