Troubleshooting; For Best Performance - Titan T4000.2 Owner's Manual

Table of Contents

Advertisement

PROBLEM
Vacuum won't turn on
Vacuum won't pick up
or low suction
Dust escaping from
vacuum
For more information please contact your retailer or Titan Vacuums at:
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags when they are 2/3 full to maintain optimum cleaning efficiency.
• Change filters when dirt is visible on them or every six months if someone in your home suffers from allergies.
Otherwise, once a year should do for replacing the filters.
• Always use genuine bags, filters and parts, as use of other products may result in poor cleaning or filtration
performance. Titan filtration products are designed for maximum performance.
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner's manual.

Troubleshooting

POSSIBLE REASON
• Power cord not firmly
plugged in
• Blown fuse or tripped
breaker
• Needs service
• Vacuum bag full
• Clogged filter
• Hose clogged
• Bag compartment cover not
installed properly
• Filter not installed correctly
• Vacuum bag not installed
correctly
titanvacs.com or 1-844-202-9924

For Best Performance

13
POSSIBLE SOLUTION
• Plug unit in firmly
• Check house fuse or
breaker. Replace fuse /
reset breaker
• Take to a Titan
Service Center
• Install new bag
• Install new filter
• Remove obstacle
• Reinsert the cover and
secure latch
• Review filter installation
(page 8)
• Review bag installation
(page 7)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc6000.2

Table of Contents