Related Manuals for Titan TTB671VAC
Summary of Contents for Titan TTB671VAC
- Page 1 Vacuum Cleaner 800W TTB671VAC Barcode: 5052931541393 Ref. No.: 7994J WARNING: Read the instructions before using the product! BX220IM...
- Page 2 - Loss of use of the goods This guarantee does not affect your statutory rights. This guarantee is only valid in the UK. For any enquiries relating to the guarantee please refer to your retailer. Vacuum Cleaner 800W – TTB671VAC...
-
Page 3: Table Of Contents
Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal EC declaration of conformity... - Page 4 Safety information TTB671VAC by TITAN Safety warnings IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! >This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
- Page 5 Safety information TTB671VAC by TITAN product in areas where these liquids are present. Do not vacuum up acids. >Do not vacuum up any objects which are toxic, cancer causing, combustible, or any other dangerous materials, such as asbestos, asbestos dust, arsenic, barium, beryllium, lead, pesticides, or any other substances hazardous to health.
- Page 6 Safety information TTB671VAC by TITAN Safety warnings Electrical safety >Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply. >Do not operate any appliance with a damaged power cord or plug, when the appliance malfunctions or has been damaged in any manner.
-
Page 7: Safety Information
Safety information TTB671VAC by TITAN WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paint •... - Page 8 Safety information TTB671VAC by TITAN Symbols Lock / to tighten or secure. Unlock / to loosen. Note / Remark. Caution / Warning. Read the instruction Wear eye protection. manual. Wear a dust mask. Wear hearing protection. Wear protective gloves. Beware of electric...
-
Page 9: Your Product
Your product TTB671VAC by TITAN Your product... - Page 10 Your product TTB671VAC by TITAN Your product On/off switch 13. Suction handle Power indicator a. Suction power control Transport handle 14. Suction tube (x 2) Motor unit 15. Combination brush a. Air inlet* a. Brush switch* b. Filter* c. Basket* 16.
- Page 11 Your product TTB671VAC by TITAN > Uncertainty K : 2 dB(A) Hand arm vibration values > Hand arm vibration a : 0.122 m/s > Uncertainty K : 0.05 m/s The sound values have been determined according to noise test code given in EN 60335-2-69, using the basic standards ISO 3744 and ISO 11203.
-
Page 12: Before You Start
Before you start TTB671VAC by TITAN Unpacking > > Remove all packing materials and shipping devices, if applicable. > Make sure the delivery contents are complete and free of any damage. If you your dealer. Using an incomplete or damaged product represents a hazard to people and property. - Page 13 Before you start TTB671VAC by TITAN Base > > Align and attach the castors (8) onto the base (6). Push the castors (8) all the way to the stop. > Align the markings “1” / “2” and assemble the wheels (7) onto the base (6).
- Page 14 Before you start TTB671VAC by TITAN Assembly > collection container (9). Ensure the (Fig. 3). > Place the motor unit (4) onto the collection container (9) and secure it with the fasteners (5) (Fig. 4). Fig. 3 Fig. 4...
- Page 15 Before you start TTB671VAC by TITAN Suction hose and tube > Insert the hose connector (11) into the outer opening of the intake (10) all the way to the stop. Ensure it is properly secured (Fig. 5). Fig. 5 >...
- Page 16 Before you start TTB671VAC by TITAN Assembly Fig. 7 Accessories A choice of accessories is supplied in the scope of the delivery of this product. Illustration Description Application Combination Tiles, wooden nozzle (15) Rugs, carpets. Crevice Crevices, corners, nozzle (21)
- Page 17 Before you start TTB671VAC by TITAN Combination nozzle > (15b) before using the combination nozzle (15) (Fig. 8). Fix the combination use to prevent movement of the nozzle head during transport. > Use the brush switch (15a) according to the intended application (Figs. 9, 10).
-
Page 18: In More Detail
TTB671VAC by TITAN more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal EC declaration of conformity... - Page 19 TTB671VAC by TITAN Intended use This vacuum cleaner TTB671VAC is designated with a rated input of 800 Watts. This product is intended for dry vacuuming operations with respective attachments only. This product can also be used as a dust extraction device with connected power tool.
- Page 20 Product functions TTB671VAC by TITAN Dust bag > Switch the product off and disconnect it from the power supply. > the collection container (9) (Fig. 11). > Disconnect the dust bag (24) from the inner opening of the intake (10) and remove it carefully from the collection container.
- Page 21 Product functions / Operation TTB671VAC by TITAN Switching on/off > Press the on/off switch (1) to switch the product on. > Press the on/off switch (1) again to switch the product off (Fig. 13). Fig. 13 General operation > Check the product, its power cord and plug as well as accessories for damage before each use.
- Page 22 Operation TTB671VAC by TITAN Vacuuming NOTE: Switch the product off and disconnect it from the power supply if it stops suddenly during operation and does not produce any suction. Refer to the instructions below about removing blockages and the chapter “Troubleshooting”.
- Page 23 Operation / Care and maintenance TTB671VAC by TITAN The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove debris from it after each use and before storage.
- Page 24 Care and maintenance TTB671VAC by TITAN Maintenance In order to prolong the service life of the product, we suggest cleaning the air > > Unlock the fasteners (5) and remove the motor unit (4) from the collection container (9). > Turn the motor unit (4)
- Page 25 Care and maintenance TTB671VAC by TITAN > remove dust (Fig. 18). > the latch snaps in position. Fig. 18 Fig. 19 Repair This product does not contain any parts that can be repaired by the consumer. checked and repaired. There are no spare parts available for this product. Contact an authorised dealer...
- Page 26 Care and maintenance TTB671VAC by TITAN UK plug IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown – Live As the colours of the wire in the mains lead of this product may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows.
- Page 27 Care and maintenance TTB671VAC by TITAN > Disconnect the respective attachment, suction tubes and suction hose if necessary. > Press the button (16) and keep it in position to rewind the power cord (17) (Fig. 20). Keep safe distance to avoid sudden hit of the rewinding >...
-
Page 28: Troubleshooting
Care and maintenance / Troubleshooting TTB671VAC by TITAN Transportation > Switch the product off and disconnect it from the power supply before transporting it anywhere. > Switch off the attached power tool and disconnect it from the power tool adaptor if using the product as a dust extraction device. -
Page 29: Recycling And Disposal
Troubleshooting / Recycling and disposal TTB671VAC by TITAN Problem Possible cause Solution 3. Unsatisfactory result 3.1 Attachment not 3.1 Use proper suitable for working attachment surface 3.2 Brush mode is not 3.2 Check and adjust the proper (combination brush switch brush) 3.3 Dust bag is full... -
Page 30: Ec Declaration Of Conformity
EN 55014-2:2015 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019 Authorized Signatory and technical file holer Signed for and on behalf of: Kingfisher International Products B.V.Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands Eric Capotummino Group Quality Director 2020 Vacuum Cleaner 800W – TTB671VAC... - Page 31 Manufacturer,Fabricant,Producent, Producǎtor,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square LondonW2 6PX United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com To view instruction manuals online, visit www.kingfisher.com/products...