Troubleshooting - Titan T9500 User Manual

WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
PROBLEM
Tripped circuit breaker/
Vacuum cleaner
blown fuse at household
won't start.
service panel.
Loose hose electrical
connections.
Full or clogged dust bag.
Wrong pile height setting.
Wrong power level
selected.
Hole in hose.
pick-up.
Worn nozzle agitator.
Worn or broken belt.
Dirty agitator or end caps.
Tripped overload protector
in motorized nozzle.
Hose or hood electrical
connections.
Vacuum cleaner
starts but shuts
Tripped overload protector
off.
in motorized nozzle.

TROUBLESHOOTING

POSSIBLE CAUSE
Unplugged at wall outlet.
POSSIBLE SOLUTION
Reset circuit breaker or replace fuse.
Reconnect hose ends. (page 9-10)
Change bag. (page 29-30)
Replace hose.
Change agitator. (page 33-38)
See BELT CHANGING AND AGITATOR
CLEANING. (page 33-36)
Remove any items that may be caught or
and stops again, clean agitator and end caps,
then reset. (page 28, 35)
Check connections, reconnect hose ends.
(page 9-10)
Remove any items that may be caught or
and stops again, clean agitator and end caps,
then reset. (page 26-27)
-39-