Problem Solving Guide; Troubleshooting; For Best Performance - Titan T500 Owner's Manual

PROBLEM SOLVING GUIDE

Troubleshooting

WARNING! To reduce the risk of electrical shock or injury from moving parts, unplug
the charger from the charge point and remove the battery before
servicing or cleaning the vacuum.
CAUTION! To reduce the risk of electric shock, do not handle charger plug or
appliance with wet hands.
PROBLEM
Vacuum won't
turn on
Vacuum won't
pick up or low
suction
Dust escaping
from vacuum
Key Replacement Parts
• Genuine HEPA Media Vacuum Bags: SLH-6
• Genuine Vacuum Belts: ULW-B2

For Best Performance

• Keep your vacuum clean and in good operating condition.
• Change the vacuum bag once a month or when the bag is 2/3 full to maximize
cleaning performance.
• Always use genuine vacuum bags and replacement parts. Use of other products
may result in poor cleaning performance, potential vacuum cleaner damage
and may void vacuum warranty. Genuine products are designed for maximum
cleaning performance.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow these owner's
manual instructions.
14
CHECK POINT
Battery is fully discharged Charge battery (page 6)
Needs service
Vacuum bag full
Broken belt
Worn brushroll
Vacuum bag not installed
properly
For more information, please contact your retailer or
Titan Vacuums at titanvacs.com or 1-844-202-9924
POSSIBLE SOLUTION
Take to a Titan Service Center
Install new bag (page 9)
Replace belt (page 12)
Replace brushroll (page 12)
Install bag properly.
Review bag installation (page 9)