Related Manuals for Titan TTB775VAC
Summary of Contents for Titan TTB775VAC
- Page 1 Wet/Dry Vacuum Cleaner 1400 W TTB775VAC EAN: 5059340106205 WARNING: Read the instructions before using the product! BX220IM...
- Page 2 GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
- Page 3 TTB775VAC by TITAN Let’s get started... These instructions are for your safty. Please read through them thoroughlybefore use and retain them for future reference. Getting started... Safety information Your product Technical specifications Before you start detail more Product functions Operation...
-
Page 4: Safety Warnings
Safety information TTB775VAC by TITAN Safety warnings IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! > This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience... - Page 5 Safety information TTB775VAC by TITAN combustible liquids, such as gasoline, photocopier powder or volatile substances; and do not use the product in areas where these liquids are present. Do not vacuum up acids. > Do not vacuum up any objects which are toxic, cancer...
-
Page 6: Operation
Safety information TTB775VAC by TITAN of the operator. > The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation > Obtain ear protection and safety glasses. Wear them at all times while operating the product. - Page 7 Safety information TTB775VAC by TITAN > If the product should start making any unusual noise or vibration, immediately shut off the power source and allow the product to stop. Disconnect the product from the supply and take the following steps before restarting and operating the product: - inspect for damage;...
-
Page 8: Electrical Safety
Safety information TTB775VAC by TITAN > Slightly dampen surfaces in dust conditions or use mister attachment. Electrical safety > Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply. > Do not operate any product with a damaged power cord or plug, when the product malfunctions or has been damaged in any manner. -
Page 9: Residual Risks
Safety information TTB775VAC by TITAN Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: >... - Page 10 Safety information TTB775VAC by TITAN grinding Breathing in very fine particles of crystalline silica can lead to the development of: Lung cancer Silicosis Chronic Obstructive Pulmonary Disorder (Chronic obstructive pulmonary disease (COPD)) And breathing in fine particles of wood dust can lead to the...
-
Page 11: Safety Information
Safety information TTB775VAC by TITAN http://www.hse.gov.uk/construction or http://www.hse.gov. uk/pubns/cis69.pdf WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: - Lead from lead-based paint. - Page 12 Safety information TTB775VAC by TITAN Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
- Page 13 Safety information TTB775VAC by TITAN This product is of protection class II. That means it is equipped with enhanced or double insulation. Wet or damp Blowing Keep bystanders away! Objects thrown by the product could hit the user or other bystanders.
-
Page 14: Your Product
Your product TTB775VAC by TITAN Your product... -
Page 15: Technical Specifications
Your product / Technical specifications TTB775VAC by TITAN On / off switch 11. Hook (for cord storage) Plastic clasp (x2) 12. Air outlet Tank 13. Hose Castor (x4) a. Hose handle a. Screw* (x4) b. Hose connector Anti-static chain 14. Extension tube (x3) Air inlet 15. -
Page 16: Before You Start
Before you start TTB775VAC by TITAN Unpacking Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer. - Page 17 Before you start TTB775VAC by TITAN Illustration Description Possible application Castors (4) Connect the hose (13) to the air Hose (13) inlet / outlet (6, 12). Connect attachments / accessories Hose handle (13a) onto the hose handle (13a). Connect onto the hose handle...
- Page 18 Before you start TTB775VAC by TITAN Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures...
- Page 19 Before you start TTB775VAC by TITAN NOTE: Always use the product: – with dust filter (18) and dust bag (19) assembled for dry vacuuming and blowing (Fig. 3). – with foam sleeve (17) for wet vacuuming (Fig. 4). Operation Dry vacuuming...
- Page 20 Before you start TTB775VAC by TITAN Dust collection and blowing > Place the dust bag (19) into the tank (3). Ensure the dust bag opening (19a) is located on top. > Hold the side flaps of the dust bag opening (19a) and slide the dust bag opening (19a) onto the inner opening of the air inlet (6) (Fig.
- Page 21 Before you start TTB775VAC by TITAN Liquid collection NOTE: Always ensure the cartridge filter (18) and dust bag (19) are NOT used for wet vacuuming. > Slide the foam sleeve (17) onto the motor unit (7) (Fig. 8). Ensure it sits properly in position.
- Page 22 Before you start TTB775VAC by TITAN Fig. 10 Fig. 11 Hose (blowing) > Align the arrow on the hose connector (13b) with the tab on the outer opening of the air outlet (12) and slide the hose connector onto the air outlet (Fig. 12, step 1).
-
Page 23: Connection To Power Supply
Before you start TTB775VAC by TITAN Accessories > Connect the extension tube(s) (14) and / or accessory (15, 16) onto the hose handle (13a) if required (Fig. 14). Fig. 14 > Remove the respective attachment (15, 16) and / or extension tube(s) (14) from the hose handle (13a) if necessary. - Page 24 TTB775VAC by TITAN more detail… Product functions Operation Care and maintenance Troubleshooting Recycling and disposal...
-
Page 25: Product Functions
TTB775VAC by TITAN Intended use This vacuum cleaner TTB775VAC is designated with a rated input of 1400 Watts. This product is intended for wet and dry vacuuming operations with respective attachments only. This product can also be used as an occasional blower. - Page 26 Product functions TTB775VAC by TITAN Cartridge filter (dry vacuuming and blowing) > Use the cartridge filter (18) to collect particles that are not already caught by the dust bag (19). Always assemble the cartridge filter (18) onto the motor unit (7) for dry vacuuming operations (Fig.
-
Page 27: Safety Valve
Product functions TTB775VAC by TITAN Safety valve The product is designed with a safety valve (7a) to prevent water from entering into the motor unit (7) during wet vacuuming operations (Fig. 18). Before use, check that the safety valve moves freely within the cage. -
Page 28: General Operation
Operation TTB775VAC by TITAN General operation > Check the product, its power cord and plug as well as accessories and attachments for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that the accessories and attachments are properly fixed. -
Page 29: Wet Vacuuming
Operation TTB775VAC by TITAN Wet vacuuming > During wet vacuuming, check the water level in the tank regularly. The water level should be below the air inlet (6) (Fig. 22). Empty the tank (3) regularly if large quantities of water are vacuumed. -
Page 30: Care And Maintenance
Care and maintenance TTB775VAC by TITAN The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove debris from it after each use and before storage. - Page 31 Care and maintenance TTB775VAC by TITAN > Press the on / off switch (1) to position O to switch the product off. > Remove the attachment fitted onto the hose handle (13a) / extension tube (14). > Disassemble the tank (3) in reverse order of assembly and disconnect the hose (13) / extension tube(s) (14), according to the product configuration.
- Page 32 Care and maintenance TTB775VAC by TITAN Spare parts / Replacement parts The following parts of this product may be replaced by the consumer. Spare parts are available at an authorised dealer or through our customer service. Description Model no. or Specification...
- Page 33 Care and maintenance TTB775VAC by TITAN Storage > Switch the product off and disconnect it from the power supply. > Disconnect the respective attachment (15, 16), hose (13) and extension tube(s) (14) if necessary. > Clean and empty the product as described above.
-
Page 34: Troubleshooting
Troubleshooting TTB775VAC by TITAN Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! -
Page 35: Recycling And Disposal
Troubleshooting / Recycling and disposal TTB775VAC by TITAN Problem Possible Cause Solution 4. Unsatisfactory 4.1. Attachment not suitable 4.1. Use proper attachment for working surface result 4.2. Dust bag is full 4.2. Replace with a new dust 4.3. Dust bag is damaged 4.3. - Page 36 Manufacturer,Fabricant,Producent, Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com, www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...