Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Titan T4000.2
Summary of Contents for Titan T4000.2
- Page 1 HEAVY DUTY COMMERCIAL OWNER’S MANUAL...
-
Page 2: Table Of Contents
Index Important Safety Instructions............2 Two-Wire Polarized Plug. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. -
Page 4: Two-Wire Polarized Plug
Two-Wire Polarized Cord Two-Wire Polarized Plug This product is equipped with a polarized alternating current line Model: T4000 plug (a plug having one blade wider than the other) . To reduce the risk of electric shock this product is This plug will fit into the power outlet only one way . This is a equipped with a polarized alternating current line plug safety feature . -
Page 5: Parts Identification
Parts Identification Model T4000 On/Off switch Hose hanger Quick cord release Hose handle Handle tube Cord storage hooks Power cord Power Wand Bag compartment Easy-carry handle cover latch Accessory Bag compartment attachment opening Quick Tools clean-out Quick port clean-out port Carpet/Floor Nozzle hose Selector... - Page 6 Parts Identification Model TC6000 Cord retainer Hose hanger Hose handle Cord lock Handle tube Cord storage Power cord hook On/Off switch Bag compartment Power wand cover latch Easy-carry handle Accessory Bag compartment attachment opening Tools Quick clean-out port Brushroll jam Quick indicator clean-out...
-
Page 7: How To Assemble And Operate The Vacuum
How to Assemble and Operate the Vacuum Model T4000 The vacuum cleaner and the handle are packed separately. 1. After first removing the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hooks on the handle are positioned to the back of the vacuum cleaner (Fig. -
Page 8: How To Change The Vacuum Bag
How to Assemble and Operate the Vacuum Model TC6000 The vacuum cleaner and the handle are packed separately. 1. Remove the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hook on the handle is positioned to the back of the vacuum cleaner (Fig. -
Page 9: Handle Adjustments
Handle Adjustments The handle on this vacuum cleaner can be set to one of three positions – upright, middle or low. How to Adjust the Handle 1. To release the handle, step on the foot pedal release on the left rear corner of the vacuum cleaner (Fig. -
Page 10: Edge Cleaning Feature
Edge Cleaning Feature The edge cleaning feature provides improved cleaning of carpets near walls and stationary furniture. For maximum edge cleaning, position the right side of the vacuum (from the user’s perspective) near walls or stationary furniture. Automatic Self-Adjusting Nozzle Your vacuum cleaner is designed with an automatic self-adjusting nozzle. -
Page 11: On-Board Tool Cleaning
On-Board Tool Cleaning These vacuums are equipped with on-board cleaning tools including a metal telescopic power wand, stretch hose, dusting brush and a crevice tool. 1. To use the cleaning tools, lift the hose handle straight up from the vacuum (Fig. 1). 2. -
Page 12: How To Replace The Vacuum Belt And Headlight Bulb
How to Replace the Vacuum Belt CAUTION: Unplug the vacuum cleaner before performing any of these steps. How to Remove the Bottom Plate 1. Place the vacuum cleaner in the low position by pressing the foot pedal release twice while reclining the handle. Turn the vacuum over. 2. -
Page 13: How To Clean The Nozzle Hose
How to Clean the Nozzle Hose CAUTION: Unplug the vacuum cleaner. The nozzle hose carries the dirt from the nozzle to the vacuum bag. If the hose should become clogged: 1. Remove the wand from the wand/hose holder as shown on page 10. 2. -
Page 14: Troubleshooting
• Vacuum bag not installed • Review bag installation correctly (page 7) For more information please contact your retailer or Titan Vacuums at: titanvacs.com or 1-844-202-9924 For Best Performance • Keep machine and all accessories clean and in good operating condition. -
Page 15: Warranty
This warranty provides, at no cost to you, all labor and parts to keep this vacuum in correct operating condition during the warranted period. How to Get Service: Warranty service can only be obtained by presenting the vacuum to the Titan Service Center. A proof-of-purchase and product serial number will be required before service is rendered. - Page 16 The model and serial number of this product may be found on the back of the unit. Register your Titan vacuum online at www.titanvacs.com as soon as possible for your protection. Also, note the model and serial numbers of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.
Need help?
Do you have a question about the T4000.2 and is the answer not in the manual?
Questions and answers
I have trouble getting the hose back in the slot when using the brushes. What am i doing wrong?
To insert the hose back into the slot on the Titan T4000.2 when using the brushes, squeeze both tabs on the quick clean-out port and push the hose back into the wand/hose holder. Then replace the wand.
This answer is automatically generated
How do I replace the switch that is for carpet and floor.