Page 3
Congratulations on your purchase of a power tool from Titan Power Tools (UK) Ltd. We want you to continue getting the best performance from it so this handbook includes information on safety, handling and care. Please retain this handbook in case you need to refer to any of the information in the future.
SAFETY INSTRUCTIONS Warning: Read all instructions. Failure to follow all instructions listed below may result in serious injury. This product should never be left unattended when connected to the mains supply. SAVE THESE INSTRUCTIONS • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles. SYMBOLS Read the manual Warning Wear gloves Wear dust mask,eye & ear protection Conforms to relevant safety standards 15L WET/DRY VACUUM TTB059VAC TVC100P-M-070924.indd 5 2007-9-24 19:30:02...
Page 6
1. BLOWER HEAD 2. LATCH 3. CONTAINER 4. WHEEL 5. VACUUM HOSE 6. HOSE CONNECTION PIECE 7. FILTER BASKET 8. ON/OFF SWITCH/OPERATING MODE SWITCH BLOWER HEAD 9. COMBI NOZZLE (SEE FIG 5) 10. DUST BAG (SEE FIG 8) 11. FOAM FILTER (SEE FIG 7) 12.
1000W Collection capacity: Protection class: / II Protection against ingress of water: IPX4 Machine weight: 4.8kg ACCESSORIES Vacuum hose Vacuum tube 2pcs Combi nozzle Crevice nozzle Wheel 4pcs Foam filter Dust bag 15L WET/DRY VACUUM TTB059VAC TVC100P-M-070924.indd 7 2007-9-24 19:30:03...
Page 8
Note: Before using the tool, read the instruction book carefully. MOUNTING 1. Assemble the wheels (See Fig 1, 2) Push each wheel into the base of the container ensuring correct orientation. The wheels are friction fit. Fig 1 2. Assemble the hose Caution: This hose contains electrical connections: - do not use to suck up water (for vacuum cleaners...
Page 9
Push the combi nozzle (9) to the other end of the vacuum tube. (See Fig 5) 3. The function of the nozzle(See Fig 6) Fig 5 Fig 6 15L WET/DRY VACUUM TTB059VAC TVC100P-M-070924.indd 9 2007-9-24 19:30:04...
OPERATION Observe correct mains voltage: The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Equipment marked with 230 V can also be connected to 220V. WET VACUUMING Fig 7 Danger of explosion and fire! Do not vacuum inflammable or explosive fluids;...
filter with a brush or rinse with water. ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. For further information visit www.recycle-more.co.uk. 15L WET/DRY VACUUM TTB059VAC TVC100P-M-070924.indd 11 2007-9-24 19:30:04...
PLUG REPLACEMENT If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.The wire which is coloured...
Declaration of Conformity We, Importer Titan Power Tools (UK) Ltd BA22 8RT Declare that the product 15L WET/DRY VACUUM TTB059VAC Complies with the essential health and safety requirements of the following directive: EC Low Voltage Directive 2006/95/EC EC Electromagnetic Compatibility Directive 2004/108/EC 2002/95/EC Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Standards and technical specifications referred to:...
Need help?
Do you have a question about the TTB059VAC and is the answer not in the manual?
Questions and answers