Advertisement
Quick Links
Advertisement
Related Manuals for Titan T1400
Summary of Contents for Titan T1400
- Page 1 INSTRUCTION MANUAL BAGGED VACUUM CLEANER Model No. : T1400 - 1 -...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) WARNING-To reduce the risk of fire, electric shock, or injury: 1. Do not leave vacuum cleaner when plugged in. Unplug from outlet when no use and before servicing. -
Page 3: Components And Equipment
COMPONENTS AND EQUIPMENT 11.Motor filter 17.2331.07 12.Paper bag 17.2415.06 13.Hepa filter 17.2332.06 - 3 -... - Page 4 PREVENTION Switch off the vacuum cleaner immediately if the air intakes, the floor brushes or the telescopic wand becomes blocked. Before starting the vacuum cleaner up again remove the substance causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes.
-
Page 5: Assembling The Vacuum Cleaner
ASSEMBLING THE VACUUM CLEANER 1. Assembly and disassembly of the wand Assembly: Insert the tube in the air intake opening. Push the tube in until it locks in place Disassembly: Take the tube from the air intake after disconnect from the mains socket. -
Page 6: Operation
Crevice tool Dust brush Upholstery brush OPERATION Vacuum cleaning 1:Before using the device first roll out a sufficient length of electric flex cord and plug into the mains socket. The yellow mark on the electric flex cord is the maximum length that must not be exceeded. To switch on the device press the foot pedal button on the casing with your foot 2:To rewind the power cord,press the button... - Page 7 hose with the blower, change the bag if it is full, and clean the motor filter when it is dirty Disposable Dust Bags and Filters The dust bag and motor filter play a very important roll in the efficiency of the vacuum cleaner.
- Page 8 bag or cleaning motor filter. Never operate the vacuum cleaner without the dust bag or filter. 1. Turn off and unplug cleaner. 2. Open bag cover by pushing latch up with fingers and lifting bag cover. 3. Remove motor filter and clean by rinsing under warm water, if heavily soiled.
- Page 9 5. Put the exhaust air filter back into place (or replace with a new one) and place in the grill. 6. Close the exhaust air filter grill. For more information, please contact your retailer or Titan Vacuums at: Titanvacs.com or 1-844-202-9924...