Related Manuals for Titan TTB776VAC
Summary of Contents for Titan TTB776VAC
- Page 1 Wet/Dry Vacuum Cleaner 1400 W TTB776VAC EAN: 5059340106212 WARNING: Read the instructions before using the product! BX220IM...
- Page 2 GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
- Page 3 TTB776VAC by TITAN Let’s get started... These instructions are for your safty. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Technical specifications Before you start detail more Product functions...
- Page 4 Safety information TTB776VAC by TITAN Safety warnings IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! > This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience...
- Page 5 Safety information TTB776VAC by TITAN combustible liquids, such as gasoline, photocopier powder or volatile substances; and do not use the product in areas where these liquids are present. Do not vacuum up acids. > Do not vacuum up any objects which are toxic, cancer...
- Page 6 Safety information TTB776VAC by TITAN of the operator. > The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation > Obtain ear protection and safety glasses. Wear them at all times while operating the product.
- Page 7 Safety information TTB776VAC by TITAN > If the product should start making any unusual noise or vibration, immediately shut off the power source and allow the product to stop. Disconnect the product from the supply and take the following steps before restarting and operating the product: - inspect for damage;...
- Page 8 Safety information TTB776VAC by TITAN > Slightly dampen surfaces in dust conditions or use mister attachment. Electrical safety > Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply. > Do not operate any product with a damaged power cord or plug, when the product malfunctions or has been damaged in any manner.
- Page 9 Safety information TTB776VAC by TITAN Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: >...
- Page 10 Safety information TTB776VAC by TITAN grinding Breathing in very fine particles of crystalline silica can lead to the development of: Lung cancer Silicosis Chronic Obstructive Pulmonary Disorder (Chronic obstructive pulmonary disease (COPD)) And breathing in fine particles of wood dust can lead to the...
- Page 11 Safety information TTB776VAC by TITAN http://www.hse.gov.uk/construction or http://www.hse.gov. uk/pubns/cis69.pdf WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: - Lead from lead-based paint.
- Page 12 Safety information TTB776VAC by TITAN Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
- Page 13 Safety information TTB776VAC by TITAN Wet or damp Blowing Keep bystanders away! Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation. In general, children must not come near the area where the product is.
- Page 14 Your product TTB776VAC by TITAN Your product...
- Page 15 Your product / Technical specifications TTB776VAC by TITAN On / off switch 14. Hook (for cord storage) Synchro socket 15. Air outlet Plastic clasp (x 2) 16. Hose Tank a. Hose handle Rear wheel (x 2) b. Hose connector a. Screw* (x 2) 17.
- Page 16 Before you start TTB776VAC by TITAN Unpacking Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices, if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
- Page 17 Before you start TTB776VAC by TITAN Illustration Description Possible application Castors (7) Rear wheels (5) Connect the hose (16) to the air Hose (16) inlet / outlet (9, 15) Connect attachments / accessories Hose handle (16a) onto the hose handle (16a)
- Page 18 Before you start TTB776VAC by TITAN Filter finer particles to protect the Cartridge filter (23) motor (10). Collect debris and large dust Dust bag (24) particles. Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with...
- Page 19 Before you start TTB776VAC by TITAN > Align and slide the rear wheels (5) onto the supports. The rear wheels and the vacuum base are marked with the numbers 1 and 2. Insert wheel 1 into slot 1 on the back of the vacuum; insert wheel 2 into slot 2 on the back of the vacuum.
- Page 20 Before you start TTB776VAC by TITAN Operation Dry vacuuming Blowing Wet vacuuming Parts Motor unit (10) ● ● ● Tank (4) ● ● ● Hose (16) ● ● ● Foam sleeve (22) ● Cartridge filter (23) ● ● Dust bag (24) ●...
- Page 21 Before you start TTB776VAC by TITAN filter sits properly in position. Refer to Fig. 18. Fig. 7 Fig. 8 > Place the motor unit (10) with cartridge filter (23) onto the tank (4) and secure it with the plastic clasps (3) (Fig. 9). Ensure the motor unit sits properly on the tank and the connection is properly sealed.
- Page 22 Before you start TTB776VAC by TITAN Liquid collection NOTE: Always ensure the cartridge filter (23) and dust bag (24) are NOT used for wet vacuuming. > Slide the foam sleeve (22) onto the motor unit (10) (Fig. 10). Ensure it sits properly in position.
- Page 23 Before you start TTB776VAC by TITAN Fig. 12 Fig. 13 Hose (blowing) > Align the arrow on the hose connector (16b) with the tab on the outer opening of the air outlet (15) and slide the hose connector onto the air outlet (Fig. 14, step 1).
- Page 24 Before you start TTB776VAC by TITAN Accessories > Connect the extension tube(s) (17) and / or accessory (18, 19, 20) onto the hose handle (16a) if required (Fig. 16). Fig. 16 > Remove the respective attachment (18, 19, 20) and / or extension tube(s) (17) from the hose handle (16a) if necessary.
- Page 25 TTB776VAC by TITAN more detail… Product functions Operation Care and maintenance Troubleshooting Recycling and disposal...
- Page 26 TTB776VAC by TITAN Intended use This vacuum cleaner TTB776VAC is designated with a rated input of 1400 Watts. This product is intended for wet and dry vacuuming operations with respective attachments only. This product can also be used as an occasional blower.
- Page 27 Product functions TTB776VAC by TITAN Cartridge filter (dry vacuuming and blowing) Use the cartridge filter (23) to collect particles that are not already caught by the dust bag (24). Always assemble the cartridge filter (23) onto the motor unit (10) for dry vacuuming operations (Fig.
- Page 28 Product functions TTB776VAC by TITAN Safety valve The product is designed with a safety valve (10a) to prevent water from entering into the motor unit (10) during wet vacuuming operations (Fig. 20). Before using, check that the safety valve moves freely within the cage.
- Page 29 Operation TTB776VAC by TITAN General operation > Check the product, its power cord and plug as well as accessories and attachments for damage before each use. Do not use the product if it is damaged or shows wear. > Double check that the accessories and attachments are properly fixed.
- Page 30 Operation TTB776VAC by TITAN Wet vacuuming > During wet vacuuming, check the water level in the tank regularly. The water level should be below the air inlet (9) (Fig. 24). Empty the tank (4) regularly if large quantities of water are to be vacuumed.
- Page 31 Operation TTB776VAC by TITAN > Attach the extension tube(s) (17) onto the hose handle (16a) if required. > Attach the desired attachment onto the hose handle / extension tube. > Switch the product on and hold the hose handle firmly.
- Page 32 Operation TTB776VAC by TITAN WARNING! Do not plug any tool or appliance rated over the maximum wattage for the receptacle as noted in the chart above into the electrical socket on the vacuum cleaner. Check nameplate of the tool for the wattage rating. To reduce the risk of injury, additional power tool must be turned (O) OFF before placing on/off switch (1) in the (II) AUTO position.
- Page 33 Care and maintenance TTB776VAC by TITAN The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove debris from it after each use and before storage.
- Page 34 Care and maintenance TTB776VAC by TITAN > Press the on / off switch (1) to position O to switch the product off. > Remove the attachment fitted onto the hose handle (16a) / extension tube (17). > Disassemble the tank (4) in reverse order of assembly and disconnect the hose (16) / extension tube(s) (17), according to the product configuration.
- Page 35 Care and maintenance TTB776VAC by TITAN Spare parts / Replacement parts The following parts of this product may be replaced by the consumer. Spare parts are available at an authorised dealer or through our customer service. Description Model no. or Specification...
- Page 36 Care and maintenance TTB776VAC by TITAN Storage > Switch the product off and disconnect it from the power supply. > Disconnect the respective attachment (18, 19, 20), hose (16) and extension tube(s) (17) if necessary. > Clean and empty the product as described above.
- Page 37 Care and maintenance TTB776VAC by TITAN Transportation > Switch the product off and disconnect it from the power supply before transporting it anywhere. > Attach transportation guards, if applicable. > We recommend putting the attachments onto the attachment storage (12) and storing the power cord (13) on the hook (14) of the motor unit (10) (Fig.
- Page 38 Troubleshooting TTB776VAC by TITAN Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions!
- Page 39 Troubleshooting / Recylcling and disposal TTB776VAC by TITAN Problem Possible Cause Solution 4. Unsatisfactory 4.1. Attachment not suitable 4.1. Use proper attachment result for working surface 4.2. Dust bag is full 4.2. Replace with a new dust 4.3. Dust bag is damaged 4.3.
- Page 40 Manufacturer,Fabricant,Producent, Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com, www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...