Sartorius Basic plus Installation And Operating Instructions Manual page 17

Connecting the Balance to AC Power
The balance is powered by an AC adapter. Make sure that the voltage rating
printed on this unit is identical to your local line voltage.
If the voltage specified on the label or the plug design of the AC adapter does
not match the rating or standard you use, please contact your dealer. The AC
adapters have IP 20 protection in accordance with DIN VDE 0470/EN 60529.
Important Note:
Use only original adapters. Use of AC adapters from other manufacturers, even if
these units have a registered approval rating from a national testing laboratory,
requires the consent of an authorized service technician. To operate the balance
using an external rechargeable battery pack or an industrial power supply (IP 65),
see "Accessories."
16
Preparing Balances with a Round Weighing Pan
– Place the shield disk (2) on the balance. Turn the disk
counterclockwise until it stops and is secured.
Place the components listed below on the balance
in the order given:
– Pan support (21)
– Weighing pan (1)
Preparing Balances with a Rectangular
Weighing Pan
Place the components listed below on the balance
in the order given:
– Pan shield (only for model BP4100 S-0CE or
the option YDS02BP)
– Weighing pan (1)