S And Don - Teledyne TED 191 Instruction Manual

S F
ECTION OUR
D '
O S
Read the Operators Manual thoroughly before using the instrument.
Calibrate once per shift, and prior to each and every use.
Check the high and low alarm threshold settings prior to use.
Replace the batteries immediately when required.
Keep the instrument, cable and sensor dry at all times.
Re-calibrate after changing the sensor or batteries.
Visually inspect the whole instrument prior to use.
Check the integrity of all cable connections routinely.
Remove and carefully store the "flow diverter" when using the instrument in "static"
environments such as incubators, oxygen hoods etc.
Perform an alarm functionality test prior to each use.
Remove batteries if the instrument is not to be used for a month plus
D '
ON TS
Use the Accurox Oxygen Monitor if you suspect any malfunction.
Use the monitor in the presence of flammable anaesthetics.
Autoclave the instrument and/or the sensor.
Submerge the instrument and/or sensor in water or any other liquid.
Expose instrument to other equipment with high levels of RFI emission.
Place the instrument itself in a water vapour saturated environment.
Expose the LCD to excessive direct sunlight
Dispose of the sensor cell in fire, or place in an incinerator.
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
D ' D '
O S AND ON TS
16