Table of Contents
Advertisement
10–Internal settings
System settings (SYSTEM SETUP)
Make system settings on this screen.
The
screen has 3 pages:
SYSTEM SETUP
,
BACKUP STARTUP
CLOCK ADJUST
Touch the tabs at the bottom of the screen to open the
corresponding page.
PREFERENCES page
Set system preferences on this page.
KBD Type
Set the connected keyboard type to either
language keyboards or
JPN
Setting buttons:
,
(default)
US
JPN
Digital Ref. Level
Set the reference level for digital inputs and outputs to a
number of decibels below the maximum level (full scale).
Setting buttons:
,
–9dB
–14dB
(default)
Backup functions of system settings and
preset memory functions
You can Import / Export system files, save/ read user
settings, and select the unit startup settings using the
page on the
Backup / Startup
8 System Backup
• You can write all System Backup DATA (including
User Preset DATA) to the selected card using the
button.
Export
• You can read all System Backup DATA (including User
Preset DATA) on the selected card using the
button to rewrite the built-in memory.
ALL
The User Preset DATA read is applied to the
operation of the device.
• You can read only the User Preset DATA from the
SystemBackup DATA on the selected card using the
button to rewrite UserPreset in the
Import User
built-in memory.
User Preset DATA read is not applied to the operation
of the device. Load the User Preset DATA using the
102
TASCAM HS-2
PREFERENCES
.
for English-
US
for Japanese keyboards.
,
,
,
–16dB
–18dB
–20dB
screen.
SYSTEM SETUP
Import
button of the
User
it.
If there are no System Backup files, a pop-up window
,
indicating that the import cannot be performed is
shown.
8 Save User Preset
• You can save the current setting values as Preset
DATA in the built-in memory by pressing the
button.
8 Load Preset
• Touch the
User
and touch the
DATA (the setting values when shipped out of the
factory).
8 Startup Mode
Last Setting
User Preset
Factory Preset
NOTE
• The following backup setting items are subject to
saving and reading of the Preset DATA and are not
included in the project:
Screen name
HOME screen
LOCK SETUP
screen
PLAY SETUP
CONTROL
screen
S Y N C
T / C
CLOCK
screen
SYNC
GENERAL
REMOTE SET-
screen
UP
PARALLEL
RS-232C
ETHERNET
AUDIO
IO-
INPUT
screen
SYSTEM SET-
PREFERENCE
UP
Backup/Startup
screen
page
• User Preset DATA upon shipping from the factory is the
same as the Factory Preset DATA.
• I f p o w e r e d o f f a n d o n w i t h o u t p e r f o r m i n g
SaveUserPreset after changing StartupMode to
UserPreset when the StarupMode settings stored in the
UserPreset memory are LastSetting or FactoryPreset,
the UserPreset settings are loaded.
Then, the StarupMode settings will change to the
LastSetting or FactoryPreset stored in the UserPreset
memory.
In this case, you do not need to load the settngs of
LastSetting or FactoryPreset again. On next startup, the
LastSetting or FactoryPreset settings will be loaded.
in order to apply
LOAD Preset
button to load the User Preset DATA
button to load the Factory
Factory
: Load the previous settings on
power-on
: Load the User Preset settings on
power-on
: Load the Factory Preset settings
on power-on
Applicable setting
Page name
item
Time counter display
mode
All settings
P L A Y
IN HIBIT
page
TIME
page
MASTER
page
Master TC
FADER MODE
F A D E R
page
MODE
FADER Stop MODE
page
AUX Assign
page
All settings
page
All settings
page
INPUT SOURCE
D i g i t a l
page
Level
Startup Mode
Save
S t a r t
R e f
Advertisement
Table of Contents
