Mmr Project Name Incrementing; Larger Block Reads From Hard Disk; Mmr Will No Longer Generate Opentl Sessions Instead Of Pro Tools Sessions; Extra 2 Minutes Prior To Tapemode Start Time Eliminated - Tascam MMR-8 Owner's Manual Update

Modular multitrack recorder modular multitrack player version 4.2

Hide thumbs Also See for MMR-8:

Table of Contents

3. When Volume/Mute Automation is turned "Off", all channels will have automation

disabled. Note that this change is written to the EDL. The automation data is not

deleted and can always be turned "On" again.

MMR Project Name Incrementing

The default project naming convention on the MMR has been improved in Version 4.2 so that no

two default projects have the same name. When an MMR is powered up, if a project exists on a

disk with the name of "MMR Project", the MMR will increment and name the newest project

"MMR Project2". If a project named MMR Project2 exists, the next project will be named MMR

Project3, and so forth.

Version 4.2 reverts to the larger block reads from hard disk as found in Version 4.0 of

MMR/MMP software. This change has been re-implemented to prevent audio dropouts with

problematic drives.

MMR Will No Longer Generate OpenTL Sessions Instead

of Pro Tools Sessions

Version 4.2 fixes a bug that caused the MMR to record an OpenTL session instead of a Pro

Tools session, under specific conditions.

Version 4.2 of MMR/MMP software eliminates the extra 2 minutes of recording time at the

beginning of TapeMode projects.

TASCAM MMR-8/MMP-16 Version 4.2 Owner's Manual Update

Table of Contents

Mmp-16