Using The Built-In Speaker; Connecting Monitors And Headphones - Tascam DR-V1HD Owner's Manual

はじめに
はじめに
3 – Preparation

Using the built-in speaker

Set the SPEAKER switch on the bottom panel to ON to listen to playback with
the built-in speaker.
NOTE
When set to ON, sound will usually be output from the built-in speaker. In the
following cases, however, sound will not be output even when set to ON.
• When recording and in recording standby (video/audio)
• When headphones or another device is connected to the
port
34
TASCAM DR-V1HD

Connecting monitors and headphones

To listen with headphones or an external monitoring system (powered
monitor speakers or an amplifier and speakers), connect them to the
OUT jack.
Powered monitor speakers
or ampli er and speakers
/LINE OUT
/LINE
Headphones