Table of Contents
Advertisement
Network Screen
Setup
Configuration of VBOX Sigma is performed using a Wi-Fi hotspot access point created by the unit. You can then log in
to this access point on your phone or a computer and use a webpage to configure the unit to either use the internal GSM
modem or an external Wi-Fi hotspot to connect to your chosen correction service. Other settings options include CAN
and VBO log settings along with status information. Settings are retained after a power cycle.
If the unit is configured to use both the internal GSM modem and an external Wi-Fi hotspot, it will attempt to auto
connect to the Wi-Fi hotspot first on power up.
1. Attach the supplied cellular antenna (ANTMSTUBSMAM) to the SMA connector on the
2. Attach the supplied GNSS antenna (RLACS308) to the SMA connector on the
the centre of the roof of the vehicle, away from roof bars and other antennas. For more information on antenna
mounting positions
click
here.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/Quick_Start_Guides/VBOX_Sigma_-
top of the
unit.
bottom of the unit
and mount in
_Quick_Start_Guide
6
Advertisement
Table of Contents
