Subscribe to Our Youtube Channel
Related Manuals for Premier Mounts LMVS
Summary of Contents for Premier Mounts LMVS
- Page 1 LMVS Installation Guide Press and Release ™ Pop Out Slim www.mounts.com | North America 800.368.9700 | International +1-714-632-7100 9531-000-012-0X v4.1 2620 Palisades Drive, Corona, CA 92882 publ. 10/03/18...
-
Page 2: Included Components
LMVS Installation Guide Maximum Flat Panel Weight: Included Components 100 lb. / 45.35 kg. Wall Mount Bracket (Qty 1) (Qty 1 Pair) 5/16” Flat Washers Universal Spacers M5 Allen Driver Thread Depth Indicator Universal Washers (Qty 4) (Qty 8) (Qty 1) -
Page 3: Wood Stud Installation
LMVS Installation Guide Wood Stud Installation Use a pencil to mark the upper right mounting location 1. Use a stud finder to determine the wall studs in of the wall stud. the vicinity of the mount. 2. Use a pencil to mark each of the wall studs. - Page 4 LMVS Installation Guide 1. Level the mount Drill a pilot hole in each of the three (3) marks with a 2. Use a pencil to mark the remaining three (3) power drill and a M6 or 1/4” drill bit. mounting locations 1.
-
Page 5: Concrete Wall Installation
LMVS Installation Guide Concrete Wall Installation Two people recommended for this step; one person Drill a pilot hole in each of the four (4) mark areas to level the mount and another person to mark the with a 3/8” masonry drill bit. - Page 6 LMVS large matrix video wall. Plumb and level and mark each corner where the LMVS will be mounted (or secure to the wall). Install the second mount working in a horizontal direction.
-
Page 7: Selecting The Mounting Hardware
LMVS Installation Guide Selecting the Mounting Hardware Insert a small straw or toothpick into the threaded inserts found on the back of the flat-panel. Use a pencil to mark the depth of the threaded insert on the small straw or toothpick. -
Page 8: Universal Washer Installation
LMVS Installation Guide Universal Washer Installation Universal Washers are designed to accommodate the various M4, M5, M6 and M8 hole sizes required by flat-panels. Place the flat-panel screen-side down on a soft, flat surface. M5, M6 Identify the number and location of the thread inserts on the back of the flat-panel. - Page 9 Locking Safety Screw Installation The locking safety screws keep the flat-panel from being accidently dislodged from the LMVS. Locate the pre-installed security locking safety screw at the bottom of each of the mounting brackets. Use the M5 Allen driver (supplied) to tighten the locking safety screw.
- Page 10 LMVS Installation Guide MOVE INWARD Left Right Control Control MOVE OUTWARD Left Right Control Control TILT UP AND/ TILT DOWN AND/ Page 10 www.mounts.com | North America 800.368.9700 | International +1-714-632-7100...
- Page 11 LMVS Installation Guide LEVEL UP Left Control Right Control LEVEL DOWN Left Control Right Control ROTATE LEFT Left Control Right Control ROTATE RIGHT Left Control Right Control Page 11 www.mounts.com | North America 800.368.9700 | International +1-714-632-7100...
- Page 12 LMVS Installation Guide Use the GAPit GO/No Go Gauge (supplied with model specific spacer) as a final step in the process to inspect and adjust the gap to prevent costly replacement and extend the lifespan of the displays. Damage happens when weight is transferred to the ultra-thin bezels of video wall installations, if the recommended gap specifications of .050”...
-
Page 13: Maintenance
Maintenance Single Latch Spring Lock Figure 1 1) Push evenly in the front of the LMVS to release the single latch spring lock (Figure 1). 2) Slowly pull the front of the LMVS to extend the scissor arms (Figure 2). - Page 14 Premier Mounts intends to make this manual accurate and complete. However, Premier Mounts makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Need help?
Do you have a question about the LMVS and is the answer not in the manual?
Questions and answers