Conformity With Uk Regulations; Radio Equipment - Eu Directive (Red) 2014/53/Eu And Uk Regulation Si 2017/1206; Ce And Ukca Electromagnetic Compatibility (Emc) Conformity - Siemens SITRANS L Operating Instructions Manual

2.1.7

Conformity with UK regulations

The UKCA marking on the device symbolizes the conformity with the following UK
regulations:
Electromagnetic compatibility
EMC SI 2016/1091
Low Voltage LVD SI 2016/1101
Explosive atmosphere UKEX SI 2016/1107
Pressure equipment SI 2016/1105
Radio equipment SI 2017/1206
RoHS SI 2012/3032
The applicable regulations can be found in the UKCA declaration of conformity of the specific
device.
2.1.8 Radio Equipment - EU Directive (RED) 2014/53/EU and UK regulation SI
2017/1206
For the receiver test that covers the influence of an interferer signal to the device, the
performance criterion has at least the following level of performance according to ETSI TS
103 361 [6]:
• Performance criterion: measurement value variation Δd over time during a distance
measurement
• Level of performance: Δd ≤ ±50 mm
2.1.9

CE and UKCA Electromagnetic Compatibility (EMC) Conformity

This equipment has been tested and found to comply with the following EMC Standards:
EMC Standard
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, Class B
EN 61326:2013
(IEC 61326:2012)
EN61000-4-2:2009
EN61000-4-3:2006 + A1:2008 + A2:2010
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
2.1 Preconditions for safe use
Electromagnetic Compatibility Regulations
2016
Electrical Equipment (Safety) Regulations
2016
Equipment and Protective Systems Intended
for use in Potentially Explosive Atmospheres
Regulations 2016
Pressure Equipment (Safety) Regulations 2016
Radio Equipment Regulations 2017
The Restriction of the Use of Certain Hazard-
ous Substances in Electrical and Electronic
Equipment Regulations 2012
Title
Limits and methods of measurements of radio dis-
turbance characteristics of industrial, scientific, and
medical (ISM) radio-frequency equipment.
Electrical Equipment for Measurement, Control and
Laboratory Use – Electromagnetic Compatibility.
Electromagnetic Compatibility (EMC) Part 4-2: Testing
and measurement techniques – Electrostatic dis-
charge immunity test.
Electromagnetic Compatibility (EMC) Part 4-3: Testing
and measurement techniques – Radiated, radio-
frequency, electromagnetic field immunity test 2006
+ A1:2008 + A2:2010.
Safety information
15